Firefighter Helmet Lights: What to Look For in an NFPA-Compliant Light

When your hands are full with a hose line, a tool or a victim, a handheld light is one more thing to
hold. A firefighter helmet light solves that by putting light wherever you look. But not every helmet
light suits the fireground. Beam design, rear visibility, controls, power and standards compliance all
matter. This guide walks through each so firefighters, fire chiefs and department buyers can compare
lights on the points that count. We use the AL 400Z helmet-mounted flashlight from KBS Innovations
as a worked example throughout.

Why a firefighter helmet light matters

A helmet mounted flashlight does two things a handheld light cannot. It keeps both hands free, and it
aims the beam where your head is turned. Whether you are searching a room, forcing a door or
checking a stairwell, the light follows your eyes.
That does not make handheld lights obsolete. Many crews carry both: a helmet light for hands-free
work and a handheld or right-angle light for aiming a beam on its own. If you are building a full lighting
kit, our guide on how to choose a first responder flashlight covers the handheld side, and our
overview of tactical flashlights for first responders looks at compact, high-output options.

What NFPA 1971 means for a helmet light

NFPA 1971 set the requirements for protective ensembles for structural firefighting, including
helmets. In its 2025 edition, NFPA consolidated NFPA 1971 and several related standards into a single
standard, NFPA 1970. Because the helmet is part of the ensemble, a maker that calls a product an
NFPA 1971 helmet light should be able to back that up with a clear, written statement.
Before you buy, ask the maker:
• For its compliance statement in writing, naming the standard, the edition and the section it refers
to.
• Where that statement appears, such as the product page or datasheet.
• Whether the statement applies to the exact model and configuration you are buying.
Then check the claim against your department’s own requirements. Department policy, not a product
listing, decides what goes on a helmet.
For the AL 400Z, KBS states that the light is NFPA 1971-8.6 compliant. That statement appears on the
product page and the datasheet.

Dual beams: forward for distance, downward for close work

A single beam has to trade reach against close-up coverage. A dual-LED design gives each job its own
light.
The AL 400Z uses two LEDs with separate roles. The forward-facing LED is for distance. In Forward LED
mode it produces 475 lumens. The downward-facing LED is for close-range task lighting, such as
reading a gauge, working with tools, checking your footing or treating a patient. Combo mode runs
both at once when you need reach and close-up light together. The head also rotates 360°, so the
wearer can adjust where the light points.
It helps to know what these numbers mean. Lumens measure the total light a source puts out. Peak
beam intensity, measured in candela (cd), describes how concentrated the beam is at its center. Beam
distance describes how far that beam reaches. A high-lumen light with a wide beam may not reach as
far as a lower-lumen light with a tight one, so compare all three figures, not lumens alone.

A rear taillight for wearer visibility

Most of what a helmet light does helps you see. A rear taillight helps others see you.
The AL 400Z has a green rear taillight that adds wearer visibility in smoke, darkness and emergency
scenes. On a busy scene, a light on the back of a helmet gives crew members another visual cue for
where a teammate is. It does not replace your department’s accountability system, radio procedures
or reflective trim, but it adds one more layer of visibility from behind.

Controls that work with gloves

Structural firefighting gloves reduce dexterity. A small or flush switch that works bare-handed can be
hard to find and press in a gloved hand, especially in low visibility.
The AL 400Z uses a high-profile rear push button designed to work with gloves. The light has three
modes: Forward LED, Downward LED and Combo. When you evaluate any firefighter helmet
flashlight, test it with the gloves your crew actually wears. Can you find the button by feel? Can you
get to the mode you want without taking a glove off or looking at the light?

Power and runtime

The AL 400Z runs on 2 CR123 batteries, which are included. In Forward LED mode, KBS lists a runtime
of 4 hours. When comparing lights, ask for runtime by mode and plan battery stock around the modes
your crews use most.

A checklist for choosing a firefighter helmet light

Use these points to compare any firefighter helmet light:
• Standards statement: Does the maker state NFPA compliance in writing, naming the standard,
edition and section, and does that meet your department’s requirements?
• Beam design: Is there a beam for distance and a separate light for close work? Can you use both
together?
• Rear visibility: Is there a rear taillight, and does its color suit your department?
• Controls: Can the switch be found and pressed with your crew’s gloves on?
• Batteries: What type does it use, are batteries included, and are spares easy to stock?
• Runtime: How long does it run in the modes you will use most?
• Warranty: What does the maker cover, and for how long?
• Buying in volume: Is the light sold in multi-packs for outfitting a crew or a whole company?

Meet the AL 400Z

The AL 400Z is a helmet-mounted LED flashlight from KBS Innovations. Its Forward LED mode delivers
475 lumens with 4 hours of runtime. A downward-facing LED handles close-range tasks. The rest of
the design covers three modes (Forward LED, Downward LED and Combo), a head that rotates 360°, a
green rear taillight and a rear push button that works with gloves. It runs on 2 CR123 batteries,
included, and KBS states it is NFPA 1971-8.6 compliant.
The AL 400Z is available as a single unit or in 2-pack, 4-pack and 6-pack bundles for outfitting a crew.
You can see it alongside other hands-free lights in our Headlamps category, or browse more lighting
for the fire service on our Fire industry page.

Equip your crew

A good firefighter helmet light keeps your hands free, lights both the distance and the task in front of
you, and helps your crew see you. If the AL 400Z fits your department’s needs, it comes as a single unit
or in 2-pack, 4-pack and 6-pack bundles.

Shop the AL 400Z helmet-mounted flashlight

Frequently Asked Questions

What is NFPA 1971-8.6?

It is the designation KBS uses in stating that the AL 400Z is NFPA 1971-8.6 compliant. NFPA 1971 set
the requirements for protective ensembles for structural firefighting, and NFPA has since consolidated
it into NFPA 1970. For what a given requirement covers, consult the standard itself and ask the maker
for its written compliance statement.

A helmet light keeps both hands free and lights wherever the wearer looks. That helps during search,
forcible entry, hose work and patient care. Department policy decides whether one is required and
which models are approved.

There is no single right number. Lumens are only part of the picture: beam distance, peak beam
intensity, beam design and runtime all matter. For reference, the AL 400Z’s Forward LED mode
produces 475 lumens with 4 hours of runtime.

We use cookies to enhance your browsing experience, analyze site traffic, and improve our services. By clicking “Accept & Close,” you consent to our use of cookies. You can manage your preferences at any time.