The spec sheet for a rechargeable spotlight is full of numbers: lumens, candela, meters and hours.
Read together, they tell you how far the light reaches, how long it lasts and whether it suits your work.
Read one at a time, they can mislead. This guide explains what each figure means and how they trade
against each other. It ends with a checklist and then applies it to a real datasheet: the EDC by KBS
4,500-lumen spotlight.
Spotlight vs. flashlight vs. floodlight
The difference is where the light goes. A spotlight focuses its output into a tight, intense beam to
reach distant objects, such as a fence line or the far end of a yard. A floodlight spreads light wide to fill
an area at close range, such as a work zone or a campsite. A flashlight sits in between. It is usually
compact and built for the task in front of you.
A handheld spotlight gives up some portability for reach. It is usually larger than a flashlight and made
to be pointed at something specific. For everyday lights, browse our Handheld Flashlights range. If you
are choosing between lighting an area and reaching a distance, Portable area light vs. spotlight covers
that decision in more detail.
Lumens vs. beam distance
Lumens measure total light output: all the light a lamp emits, in every direction. They do not tell you
where that light goes. Two lights with the same lumen rating can behave very differently. One spreads
its output into a wide flood that fades within a few meters. The other packs it into a narrow beam that
carries a long way.
Reach depends on peak beam intensity, measured in candela (cd), which describes how much light
sits in the most intense part of the beam. The reflector, lens and LED decide how much of the lumen
output becomes intensity. That is why a long-range spotlight should be judged on candela and beam distance, not lumens alone.
Beam distance is often reported under the ANSI/PLATO FL1 standard, which is what the EDC by KBS
datasheet uses. FL1 defines it as the distance at which the beam falls to 0.25 lux, a very low level of
light. It is calculated from peak beam intensity, and distance grows with the square root of candela, so
doubling the candela does not double the reach.
Beam distance is a test result, measured under controlled conditions with a fully charged battery. It is
not a promise that you will see fine detail at that range. Fog, rain, dust and your own eyesight all
shorten the distance at which light is useful.
Brightness vs. runtime
Every lumen comes out of the battery. More output drains it faster, so every rechargeable light trades
brightness against runtime. That is why a useful datasheet gives runtime for each mode instead of one
headline figure. Under FL1, runtime is measured until output falls to 10 percent of its starting level.
In practice, it can help to plan your shift around the lower mode. Use the high mode when you need
to search, identify or signal, and step down when you are walking a route or working close in.
Power bank: charging your devices from your spotlight
Some lights do double duty. A rechargeable spotlight with power bank output has a USB port that lets
you top up a phone or other small device from the light’s own battery. On a long patrol, a camping trip
or during a power cut, that can mean one less device to keep charged.
The trade-off is simple: energy sent to your phone is energy the light can no longer use. If the light is
your main source of illumination, check the battery indicator and decide which device matters more
before you plug in.
Features that matter on the job
Specifications describe the beam. Features decide whether the light is easy to use at 2 a.m. in the rain.
• Trigger with safety lock: a trigger-pull switch is operated by squeezing, and a safety lock helps
prevent the light from being switched on by accident.
• Battery indicator: shows how much charge is left before you start a shift, not halfway through it.
• Hanger and belt hook: an adjustable hanger lets you hang the light, and a belt hook lets you carry
it on your belt between uses.
• Water resistance: the IP rating tells you what level of water exposure the light is tested to handle.
• Size and weight: check both if you will carry the light for hours.
Where a spotlight earns its place
• Security patrols: checking perimeters, parking areas and the far side of a lot without walking every
meter.
• Job sites: inspecting stockpiles or equipment from a distance after dark or signalling across a site.
• Outdoor activities and recreation: picking out a trail, a shoreline or a campsite.
• Emergencies: a power cut, a roadside breakdown or a storm. A charged spotlight belongs in an
emergency kit, especially one that can also charge a phone.
When you need something else
A spotlight is the wrong tool for lighting a whole area for close work. An area light fills a space evenly
without the glare of a concentrated beam. If your hands need to stay free for detailed tasks, a
headlamp puts light where you look. If you want a light that rides with you every day, a compact
flashlight is easier to carry. What is an EDC flashlight? and How to choose a handheld flashlight for
work explain those options.
A checklist for choosing a rechargeable spotlight
• Candela and beam distance, not just lumens.
• Runtime by mode, planned around the mode you will use most.
• FL1 test results, so you compare datasheets on the same basis.
• Charging: the input port, and whether the light can charge other devices.
• A trigger with a safety lock.
• A battery indicator.
• Carry options: a hanger, a belt hook or both.
• A water resistance rating that matches your conditions.
• A size and weight you can hold for as long as the job lasts.
Meet the EDC by KBS 4,500-lumen spotlight
Here is how that checklist reads on the EDC by KBS 4,500-lumen spotlight.
• High mode: 4,500 lumens for 3 hours, 150,000 cd peak beam intensity and a beam distance of up
to 775 m (FL1 test result).
• Low mode: 450 lumens for 6 hours, 13,750 cd peak beam intensity and a beam distance of up to
235 m (FL1 test result).
Flash mode is also available.
Note the relationship. Low mode has a tenth of the lumens and about a tenth of the candela, and it
doubles the runtime. Yet its FL1 beam distance is about a third of High’s, not a tenth, because distance
follows the square root of intensity. That makes Low worth considering for close and mid-range tasks,
with High kept for reaching further.
The rest of the checklist:
• Charging: a built-in USB-C rechargeable battery and a 5V USB-C output port that charges other
devices.
• Switch: trigger-pull with a safety lock.
• Battery indicator: four levels.
• Carry: an adjustable hanger and a side belt hook.
• Water resistance: IPX4.
• Size and weight: 6.4 × 3.6 × 7.8 in, 1.3 lb (590 g).
KBS lists outdoor activities, emergencies, security patrols, job sites and recreation as its uses. As a
4500 lumen spotlights with a 5V USB-C output port, it combines a long beam with the ability to charge
other devices. See the full EDC by KBS line for related lights.
Frequently Asked Questions
How far does a 4,500-lumen spotlight shine?
It depends on candela, not lumens. The EDC by KBS 4,500-lumen spotlight reaches up to 775 m on
High in FL1 testing, based on 150,000 cd peak beam intensity. Useful range is shorter in rain, fog or
dust.
What is the difference between lumens and candela?
Lumens measure total light output in all directions. Candela measures intensity in the most intense
part of the beam. Lumens tell you how much light there is; candela tells you how far it will carry.
What does IPX4 mean?
IPX4 means the light is tested to resist splashing water from any direction. IPX4 does not cover
submersion, so do not use the light underwater.








